Electronic Controls Engineer 20k-35k

Duties and Responsibilities工作职责

1. Hardware Design and Development硬件设计与开发
Responsible for electronic system design of the Peak's gas generators, LN2 Generators and other products, including analog/digital circuit design, signal conditioning, and data acquisition module development.
负责公司气体发生器、液氮发生器等产品的电子系统设计，包括模拟/数字电路设计、信号调理、数据采集模块开发。
Responsible for the design and optimization of sensor interface circuits and high-precision ADC/DAC modules.
参与传感器接口电路、高精度ADC/DAC模块的设计与优化
Design EMC/EMI protection solutions to ensure instrument compliance with electrical safety standards (e.g., CE/CSA).
设计EMC/EMI防护方案，确保仪器符合电气安全标准，例如CE/CSA等
Design support of electronic systems / modules or board / components
电子系统/模块及板卡/组件的设计支持
83 System issue review and assist root cause identifications
参与系统问题评审，协助定位根本原因
83 Support redesign the products per different purpose justified with meeting UK / International product and safety standards
根据经论证的不同用途，支持产品再设计，确保符合英国/国际产品与安全标准
85 Proactively manage electronics obsolescence initiatives in product optimization to improve customer service levels and/or quality, to reduce lead time, cost and/or risk.
管理产品优化中的电子元器件迭代升级计划，以提升客户服务水平/产品质量，从而缩短交付周期、降低成本，减少风险。

2. Embedded Systems Development嵌入式系统开发
Developed instrument control logic based on ARM, DSP, or FPGA platforms to implement real-time signal processing and algorithm transplantation.
基于ARM、DSP或FPGA平台开发仪器控制逻辑，实现实时信号处理与算法移植
Developed low-level drivers (e.g., I2C, SPI, USB, Ethernet) and optimized system response speed and stability.
编写底层驱动（如I2C、SPI、USB、以太网等），优化系统响应速度与稳定性

3. Test & Verification测试与验证
Set up test environments and completed PCBA debugging, system integration testing, and performance validation (including key metrics such as signal-to-noise ratio, linearity, and temperature drift).
搭建测试环境，完成PCBA调试、系统联调及性能验证（如信噪比、线性度、温漂等关键指标）
Analysed and resolved hardware issues during R&D (e.g., noise interference, abnormal power consumption).
分析并解决研发过程中的硬件问题（如噪声干扰、功耗异常等）

4. Cross-departmental Collaboration跨部门协作
Collaborated with UK R&D team to co-develop and optimize system integration solutions.
与总部研发团队协同开发，优化系统集成方案
Supported the production department in achieving mass production ramp-up and resolving product technical issues.
支持生产部门完成量产转化，解决产品技术问题

5.Comply with company regulations and accept other tasks assigned by the company
遵守公司规定并接受公司安排的其他任务.


Skills and Qualifications岗位要求
1.Bachelor's degree or above in Electronic Engineering, Automation, Instrument Science and Technology, or related majors.
全日制本科及以上学历，电子工程、自动化、仪器科学与技术等相关专业。
2.Over 5 years of electronic design experience, background in laboratory analytical instrument development preferred.
五年以上电子设计经验，有实验室分析仪器相关设备开发背景优先
3.Proficient in using EDA tools such as Altium Designer/Cadence, with hands-on experience in PCBA design.
熟练使用Altium Designer/Cadence等EDA工具，具备PCBA设计经验
4.Significant programming experience in C, or C++
精通C/C++嵌入式开发
5.Familiar with Internet of Things (IoT) technologies, such as wireless data transmission (Wi-Fi/Bluetooth/LoRa) and cloud data integration.
熟悉物联网（IoT）技术，如无线数据传输（Wi-Fi/蓝牙/LoRa）或云端数据对接
6.Design to manufacturing and supply chain with achieving the cost requirements set up
面向制造与供应链的设计理念，确保满足既定成本要求
7.Good communicator both verbally and written
良好的英语口语和书面沟通能力